Setting the Color Reproduction Range _
The range of reproducible
colors is called the color space. With this
camera, the color space for captured images can be set to sRGB or
Adobe RGB. For normal shooting, sRGB is recommended.
In Basic Zone modes, sRGB is set automatically.
2
Select
[Color
space].
_ Under the [_2]
tab, select [Color
space], then press <_)>.
Set the desired
color space.
®_Select [sRGB] or [Adobe RGB], then
press <_)>.
About Adobe RGB
This color space is mainly used for commercial printing and other
industrial uses. This setting is not recommended
if you do not know
about image processing, Adobe RGB, and Design rule for Camera File
System 2.0 (Exif 2.21 or higher). The image will look very subdued in a
sRGB personal computer environment
and with printers not compatible
with Design rule for Camera File System 2.0 (Exif 2.21 or higher). Post-
processing of the image with software will therefore be required.
_]
_ If the captured Still photo was ShOt in the Adobe
RGB Color Spacel the
first character in the file narne will be an Underscore i'_" .
_ The ICC profile is not appended. Refer to explanations
about the ICC
profile in the Software
Instruction Manual (p_352) on the CD-RQM:
139