Canon EOS REBEL T2I Instruction Manual page 36

Troubleshooting Guide
The shooting date and time displayed is incorrect.
® The correct date and time has not been set (p.29).
No image appears on the TV screenl
® Make sure the A'v" came or HDMI cable's plug is inserted all the way in
(p.167, 169).
® Set the video OUT system (NTSC/PAL) to the same video system as
the TV set (p.214).
_; Use the AM cable that came with the camera (p.169).
The card reader does not detect the card.
® Depending on the card reader and computer OS used, SDXC cards
might not be correctly detected, in such a case, connect your camera
and computer with the provided interface cable, and transfer the
images to your computer using EOS Utility (provided software).
The [Eye-Fi Settings] menu item does not appear.
® [EyeoFi Settings] wil! only appear when the Eye-Fi card is inserted in
the camera. Bfthe EyeoFi card has a write-protect tab, you wil! not be
able to check the card's connection status, or disable Eye-Fi card
transmission when the tab is in the locked position.
There are fewer pr!at!ng effects than listed !n the instruction
manual_
® What is displayed on the screen differs depending on the printer. This
instruction manual lists all the printing effects available (p.180).
223