Site Survey - TP-Link TL-WA601G User Manual

and printers with any other PCs or servers connected to any of the three LAN segments.
•
Wireless stations will not be able to connect to the TL-WA601G Access Points in the
illustration above. If you require wireless stations to access any LAN segment, you can
add TL-WA601G Access Points configured in Wireless Access Point mode to any LAN
segment.
Note:
You can extend this multi-point bridging by adding additional TL-WA601Gs configured in
Point-to-Point mode for each additional LAN segment. Furthermore, you can extend the range of
the wireless network with wireless antenna accessories.

3.4.3 Site Survey

After selecting a mode and pressing button Survey, you can view all of APs around you.
SSID - The SSID of the AP.
BSSID - The BSSID of the AP, usually also the MAC address of the AP.
Signal - The signal received from the AP.
Channel - The channel the AP works in.
Security - The AP communicates in privacy.
Choose - Choose one AP from list to connect to.
Press one of Connect in list to select an AP to connect to. Then the basic settings will show again.
You can save settings and reboot to take effective.
Note:
If wireless is disabled, surveying can't work. And if Access Point mode is selected, there is no
reason and no choice to connect to another AP, as it showed below.
TL-WA601G 108M Wireless Access Point User Guide
Figure 3-11 Site Survey
18