Setting The Recording/Playback Time - Toshiba KV-7960A Instruction Manual

SETTING THE RECORDING/PLAYBACK TIME

i
Before performing playback/recording, it is necessary to set the desired time mode.
REC CHECK TIMER REC VIDEO MODE
COLOR
AUTO B/W
REMOTE
OFF REMOTE OPTION
POWER EJECT
BUZZER
ON OFF
TAPE REMAIN
MEMORY
i
Consult the following table to select a correct mode for your purpose.
Mode display
SP
A 2
A 6
EP
SP A12
A18
EP
(Virtual Real Time mode)
SP A24
SP 24
SP 48
SP 72
SP 120
SP 168
SP 240
SP 480
SP 720
SP 960
SP L01
SP L02
SP
L03
(*1): Without an alarm trigger input and an one-shot trigger input.
• The possible recording time depends on the type of video tape used.
• Audio recording is possible in the A2, A6, A12, A18 and A24 hour modes.
• The A12, A24, 24, 48, 72, 120, 168, 240, 480, 720 and 960 modes are time lapse modes.
• For one-shot recording, set the VCR in the L01, L02 or L03 record mode.
• In L01, L02 or L03 modes, the VCR is set to recording pause mode. The alarm recording starts by an alarm trigger signal input,
and the VCR is set to recording pause mode again to wait for next alarm trigger input. Also the one-shot recording starts by an
one-shot trigger signal input, and the VCR is set to recording pause mode again to wait for next one-shot trigger input. When
recording pause mode continues for appointed time (L01: 1 min, L02: 2 min, L03: 3 min.) without an alarm trigger and an one-shot
trigger input, the VCR forwards the tape 2 fields with recording to protect the tape and the video head from damage.
i
HOW TO OPERATE 24 HOUR VIRTUAL REAL TIME MODE
• In order to operate 24 hour virtual real time mode, please use T-160 VHS video tape with A18 record mode. A18 mode means
that T-120 tape will run 18 hours. However, if you use longer length of video tape which is T-160, it will record up to 24 hours
with A18 mode. Also, when you use A18 mode for recording, you will get 20 fields of video information per second, A24 mode
will be less than 5 fields video information per second. (Refer to the above chart for the details.)
• When using the T-160 tape, it will be necessary to replace the tape with new one and make a cleaning of the mechanical deck
of this VCR more frequently. Because, the thickness of T-160 tape is about 3/4 of T-120 tape, so durability, mechanical
strength, etc. of the tape are inferior to T-120 tape.
21
TIME MODE button: Recording/Playback time
TIME LAPSE VCR
4Head 960 hour
DISPLAY
COUNTER
ALARM RESET
VIRTUAL REAL TIME & TIME LAPSE VCR INFORMATION CHART
Record/Play Available Time
(Using T-120) (Using T-160)
2 H 2 H 40 M
6 H 8 H
14 H 18 H 40 M
18 H 24 H
26 H 34 H 40 M
24 H 32 H
48 H 64 H
72 H 96 H
120 H 160 H
168 H 224 H
240 H 320 H
480 H 640 H
720 H 960 H
960 H 1280 H
3,600 H (*1)
7,200 H (*1)
(*1)
10,800 H
PAUSE/STILL
PLAY STOP REV FWD
TIME MODE
– +
SET
TRACKING
SHIFT
LOCATION SELECT
Recording
Recording fields Audio record
interval
1/60s 60.0 fields/s
1/60s 60.0 fields/s
0.12s 8.57 fields/s
1/20s 20.0 fields/s
0.22s 4.62 fields/s
0.20s 5.00 fields/s
0.40s 2.50 fields/s
0.60s 1.67 fields/s
1.0s 1.00 fields/s
1.4s 0.71 fields/s
2.0s 0.50 fields/s
4.0s 0.25 fields/s
6.0s 0.17 fields/s
8.0s 0.125 fields/s
60s (*1) 2 fields/1 min (*1)
120s (*1) 2 fields/2 min (*1)
(*1)
180s 2 fields/3 min (*1)
Mode display
SP
Recording/Playback time display
Tape running
Possible Continuous
Possible Continuous
Possible Continuous
Possible Continuous
Possible Continuous
Impossible Intermittent
Impossible Intermittent
Impossible Intermittent
Impossible Intermittent
Impossible Intermittent
Impossible Intermittent
Impossible Intermittent
Impossible Intermittent
Impossible Intermittent
Impossible Intermittent
Impossible Intermittent
Impossible Intermittent
H