Table of Contents
Advertisement
Positioner Setting Guide
2)
Frequency : Press the
function. Please contact the installer or the service provider for more specific
information.
3)
Position dish : Press the
position. The positioning procedure might not succeed the first time. Repeat the
procedure, if it is needed. As you press the
move to the left/right until it finds the matching position. As soon as the cursor finds
the position, the quality signal (yellow bar) will appear.
4)
Align dish : In the position, peak the dish to obtain the highest signal quality using
the
or
buttons.
. Press the red (F1) button to save it!
5)
Channel Search : Select S t a r t S e a r c h . . . to store all channels.
NOTE: There could be an error, though rare, concerning the misplacement of east
and west positions. Please check the position of the Antenna Positioner for the
best solution.
E. Initialize Position Data
F. Moving Confirmaton Box
If this item is set to Off, you need not confirm the moving when channel is changed to
other satellite.
If this item is set to On, you have to confirm the moving antenna position when
channel is changed to other satellite.
button to display the frequency list. Any frequency will
button to search and allocate the antenna to the adequate
/
You can initialize all stored position data
when you want set up new satellite position.
Positioner model only
buttons, the cursor will subsequently
Advertisement
Table of Contents
