Positioner Setting Guide
B. West Limit
The dish limits are now saved in the receiver and the dish is positioned to the most
western limit.
CAUTION: If you do not have a movable dish, just press the red(F1) button twice to
program the East and the West limit in the same position. This will be indicated by a
numeric value of 1000 for both limits.
There are two main ways of configuring the antenna: the Auto and the Manual setting.
C. Auto Setting
Press the
button to move and adjust the
motor to a certain position of the West limit.
Save it by pressing red (F1) button.
The indicated number will increase from
1000.
The Auto Setting consists of 4 main steps:
configuring the most western,middle and the
most eastern satellite and the specific Satellite
you want to set.
Positioner model only