Inserting The Dimm Into The Extender Board Connector Socket - HP rp4410 Service Manual

1. Align the DIMM with the socket located on the memory extender board. Align the notch in
the DIMM with the tab in the connector socket.
Figure 6-10 Inserting the DIMM into the Extender Board Connector Socket
2. Firmly and evenly push on each end of the DIMM until it seats in the connector socket.
Ensure that the extraction levers are in the closed position.
3. Replace the memory extender board in the chassis. See
Board" (page
4. Replace the front cover. See
5. Replace the front bezel. See
160 Removing and Replacing Components
156).
"Replacing the Front Cover" (page
"Replacing the Front Bezel" (page
"Replacing the Memory Extender
153).
152).