Removing The Access Panel; Removing The Front Bezel; Installing Mass Storage Devices - HP ProLiant ML110 - G2 Server Installation Sheet

Opening the Server
The access panel and the front bezel are both detachable. You need
to remove these system covers before you can remove or replace a
server component.

Removing the Access Panel

Removing the Front Bezel

Installing Mass Storage Devices

The lower drive bay on the front panel accommodates an HDD
cage for installation of up to four additional hard drives. The
hot-plug HDD cage model supports SATA drives only, while the
non-hot-plug model supports both SATA and SCSI drives.
CAUTION: Drives can be damaged by static electricity. Before
handling drives, touch an unpainted metal surface to discharge
static electricity.
WARNING: If you are going to install a non-hot-plug drive,
power down the server first.
Non-hot-plug SCSI Drives