Advertisement
Overview
Your Model C5400 Upgrade Kit provides a Postscript emulation driver
®
for Macintosh
Windows systems. It also activates the Ethernet port so you can use your
printer on a network.
Installing the kit involves four steps:
•
: Uninstall the C5400 PCL Printer Driver (Windows only) . . p. 2
Step 1
•
: Install the New DIMM in the Printer . . . . . . . . . . . . . . . . . . p. 3
Step 2
•
: Make the Network Connection, if applicable . . . . . . . . . . . p. 11
Step 3
•
: Configure the Network and/or Install Printer Driver(s) . . . p. 12
Step 4
Caution!
To avoid damage by static electricity or rough handling, keep the DIMM
board in its packaging until you're ready to install it.
You will need a Phillips bit screwdriver to install the kit.
Note:
®
and Windows
systems, in addition to the PCL driver for
1
Advertisement
