Connecting To The Usb 2.0 Header; Connecting To The Flexible Audio System; Back Panel Audio Connectors; Usb 2.0 Header Signal Names - Intel DG965RY Product Manual

Intel Desktop Board DG965RY Product Guide

Connecting to the USB 2.0 Header

Before connecting to the USB 2.0 header, observe the precautions in "Before You
Begin" on page 25. See Figure 22, G on page 42 for the location of the black USB 2.0
header. Table 11 shows the pin assignments for the USB 2.0 header.
Table 11. USB 2.0 Header Signal Names
Pin Signal Name
1 Power (+5 V)
3 D-
5 D+
7 Ground
9 Key
Note: USB ports may be assigned as needed.

Connecting to the Flexible Audio System

After installing the SigmaTel audio driver from the Intel
CD-ROM, the multi-channel audio feature can be enabled. Figure 23 shows the back
panel audio connectors. The default connector assignments are shown in the table.
The connectors are retaskable using the audio driver interface.
46
USB Port A
Item Description
A Line in/retasking jack
B Line out/retasking jack
C Mic in/retasking jack
Figure 23. Back Panel Audio Connectors
USB Port B
Pin Signal Name
2 Power (+5 V)
4 D-
6 D+
8 Ground
10 No Connection
®
Express Installer driver