Intel Desktop Board DG965PZ Product Guide
Installing and Removing a Processor
Instructions on how to install the processor on the desktop board are given below.
Installing a Processor
CAUTION
Before installing or removing the processor, make sure the AC power has been
removed by unplugging the power cord from the computer; the standby power LED
should not be lit (see Figure 3 on page 22). Failure to do so could damage the
processor and the board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 25.
2. Open the socket lever by pushing the lever down and away from the socket
(Figure 6, A and B).
3. Lift the load plate (Figure 7, A). Do not touch the socket contacts (Figure 7, B).
30
Figure 6. Lift Socket Lever
Figure 7. Lift the Load Plate