Epson Stylus Photo 1400 User Manual page 40

4. Make sure
Position Confirmation Pattern
5. Click
Print
CD or DVD.
6. Remove the CD or DVD and measure the distance from
the edge of the hole to the small cross marks labeled
and
Right
accurate measurements.
7. Open the
then select
You see a screen like this:
8. Click
Enter Values
Top distance (from your
measurement) in the Height (Top)
box. Enter the Right distance (from
your measurement) in the Width
(Right) box.
9. Click
OK
measurements.
Adjusting the Print Density with Windows
If ink smears on your printed CDs or DVDs, you may need to adjust the color
saturation or ink density. CDs and DVDs from different manufacturers may
absorb ink differently, so you may need to adjust the density for each type of disc.
Follow these instructions to print a color saturation check pattern, and then make
adjustments as necessary.
1. Place an extra ink-jet printable CD or DVD on the CD/DVD tray and insert
it into the printer, as described on page 35.
2. Start Epson Print CD.
3. Open the
4. Make sure
Density Confirmation Pattern
5. Click
Print
40
Printing from Start to Finish
EPSON Stylus Photo 1400 Series
. The confirmation pattern is printed on the
. You'll need a metric ruler with millimeters for
menu, select
File
Adjust Print Position
, then input the
to save the
menu and select
File
EPSON Stylus Photo 1400 Series
.
.
,
Print
.
.
Print
.
is selected, then click
Top
is selected, then click
Print
Print