Print And Noise Problems - Epson PictureMate 500 User Manual

Irregular Cannot recognize the
external device.
2
device.*
Printer Temperature inside
temperature the printer is too high.
3
error* Print quality may
decline.
To resolve this
problem, see your
printer's
documentation.
Bluetooth Error in the data. The
data error print results may not
be perfect.
Error in the data. The
image cannot be
printed.
The image is too large
to print with Bluetooth.
The image is too
complex to print with
Bluetooth.
*1 This warning appears when the Print button is pushed, and it
disappears after three seconds.
*2 This warning is displayed for one second every 3 seconds.
*3 This warning appears when the Print button is pushed, and
disappears when the OK button is pushed. It appears only once
during power on.
Connect on external

Print and Noise Problems

storage device that is
compatible with the
printer.
If you use the printer in
places subject to
direct sunlight, heat
sources, or high
temperature such as in
the car, move the
printer to the shade or
a cool place. When
the temperature inside
the printer decreases,
the error is canceled.
Check the data.
Check the data.
Print the data from a
memory card or
computer.
Check the data.
PictureMate makes an unexpected noise after you
install a photo cartridge.
The first time you install the photo cartridge,
PictureMate will charge its print head for about three
minutes. Wait until charging finishes before you turn
it off, or it may charge improperly and use more ink
the next time you turn it on.
Your PictureMate makes an unexpected noise when
you turn it on or after it has been sitting for awhile.
PictureMate is performing routine maintenance.
PictureMate sounds as though it is printing, but
nothing prints.
❏
PictureMate may be preparing to print.
❏
Make sure the print head nozzles are not clogged.
To clean the print head, see "Cleaning the Print
Head" on page 66.
❏
PictureMate won't work properly if it's tilted or
at an angle. Place it on a flat, stable surface that
extends beyond the printer base in all directions.
73
Troubleshooting