Installation
Instructions
If you have any questions, call 800.GE.CARES (800.432.2737)
In Canada,
www.geappliances or call 1.800.561.3344.
visit
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
for local inspector's use.
IMPORTANT –
•
codes and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
for future reference.
• Skill level – Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time – 1-3 hours
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
FOR YOUR SAFETY:
WARNING
• This appliance must be properly grounded and
installed as described in these Installation Instructions.
• Do not install or store the appliance in an area where
it will be exposed to water/weather. See the Location
of Your Washer section.
• NOTE: This appliance must be properly
grounded, and electrical service to the washer
must conform with local codes and ordinances
and the latest edition of the National Electrical
Code, ANSI/NFPA 70.
Save these instructions
Observe all governing
Be sure to leave these
Keep these instructions
or visit our Website at:
TOOLS REQUIRED FOR
WASHER INSTALLATION
1/4 nut driver
3/8 socket with ratchet
3/8 open-end wrench
Adjustable wrench or 7/16 socket with ratchet
Adjustable wrench or 9/16 open-end wrench
Channel-lock adjustable pliers
Carpenter's level
PARTS SUPPLIED
Water Hoses (2)
STACK BRACKET KIT
A stack bracket kit is available at additional cost.
It can be ordered in the United States by visiting
our website at GEAppliances.com or calling 800.
GE.CARES. Order kit #WE25X10018 or GEFLSTACK.
In Canada, please contact your nearest parts retailer.
14
Washer
GEAppliances.com.
Cable Tie
Hose Guide