Chapter 5: Raid Functions; Operating System; Raid Arrays; How Raid Works - Biostar TA990FXE Setup Manual

CHAPTER 5: RAID FUNCTIONS

5.1 O
PERATING
Supports Windows Vista and Windows 7.
5.2 R A
AID RRAYS
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
5.3 H RAID W
OW
RAID 0:
The controller "stripes" data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
­
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
­
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No
­
capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
­
fails, all data is lost.
Fault Tolerance: No.
­
S
YSTEM
ORKS
Block 1
Block 3
Block 5
TA990FXE
Block 2
Block 4
Block 6
21