IdeaPad Y450 Hardware Maintenance Manual
Figure 11. Removal steps of keyboard bezel and speaker (continued)
Pull out the five antenna cables from the guide hole of the system board in the
direction shown by arrows
direction shown by arrows
When installing:
•
•
70
9
Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assemblly. Route
the LCD cable along the cable guides.
and release them from the cable guides in the
8
.
9
8
8
9
9
9
9
9
8
9
9