Epson Equity Ie Q50188015-1 User Manual page 29

If the diskette in drive A is not formatted, the DISKCOPY program
formats it. Then the program begins copying the data from the
computer's memory to the formatted diskette. When it has copied all the
files from memory, the screen displays this message:
Insert SOURCE diskette in drive A:
Press any key when ready . . .
5.
Remove the copy diskette from the drive and insert the original Startup/
Operating 1 diskette. Press any key.
The program copies the rest of the files from the original diskette to the
computer's memory and then displays this message:
Insert TARGET diskette in drive A:
Press any key when ready . . .
6.
Remove the Startup/Operating 1 diskette from drive A and insert the
copy diskette in the drive. Then press any key. The program copies the
remaining files from the computer's memory to the copy diskette.
When the copy is complete, you see this prompt:
Copy another diskette (Y/N)?
7.
Press Y so you can make a copy of the Operating 2 diskette. Follow
the instructions above and the prompts on the screen to copy the
Operating 2 diskette.
8.
When finish and the
you
prompt appears, press Y so you can make a copy of the Reference
diskette. Follow the instructions above and the prompts on the screen
to copy the Reference diskette.
9.
When you finish copying the Reference diskette, press
MS-DOS command prompt.
1-16
Copy another diskette (Y/N) ?
to return to the
N
Setting Up Your System