Table of Contents
Advertisement
Displaying on-screen information
Press DISPLAY repeatedly until the desired
display appears.
Each time you press DISPLAY, the display changes as
follows:
Status display* n XDS ON** n cc 1 ON***
DISPLAY OFF N
DISPLAY
* Channel number, the current time, channel caption
(if set), and MTS mode (if SAP is selected) are
displayed. SAP indication disappears after three
seconds.
** Some programs are broadcast with XDS (Extended
Data Service) which shows a network name,
program name, program type, program length, call
letters, and time of the show. When you select XDS
with the DISPLAY button, this information will be
displayed on the screen if the broadcaster offers this
service.
*** Some programs are broadcast with Caption Vision.
When you select Caption Vision with the DISPLAY
button, Caption Vision will be displayed on the
screen if the broadcaster offers this service. (See
page 34 for selecting Caption Vision.)
To cancel the display, press DISPLAY repeatedly until
"DISPLAY OFF" appears. "DISPLAY OFF" goes off
after three seconds.
Setting the Sleep Timer
The projection TV stays on for the length of time you
specify and then shuts off automatically.
Press SLEEP repeatedly until the time (minutes)
you want appears.
Each time you press SLEEP, the time changes as
follows:
30 n 60 n 90 n SLEEP OFF
SLEEP
To cancel the Sleep Timer, press SLEEP repeatedly
until "SLEEP OFF" appears, or turn off the projection
TV.
20
-EN Operations
Watching a video input picture
Press TV/VIDEO repeatedly until the desired
video input appears.
Each time you press TV/VIDEO, the display changes
as follows:
TV n VIDEO 1 n VIDEO 2 n VIDEO 3
TV/VIDEO
To return to the TV picture, press ANT so that a
channel number appears.
Changing the VHF/UHF input to the
AUX input
Press ANT.
"AUX" appears beside the channel number.
ANT
Pressing ANT again switches back to the VHF/UHF
input.
Watching two
programs at one
time — PIP
The Picture-in-Picture (PIP) feature allows you to
watch both the main picture and a window picture
simultaneously.
SWAP
CH +/– (yellow
PIP
labelled button)
TV/VIDEO (yellow
POSITION
labelled button)
AUDIO
Use the yellow labelled buttons for PIP operations.
Displaying a window picture
Press PIP.
Input-source mode or TV
channel for the main picture
Main picture
PIP
Window picture
(1/9 size)
Input-source mode or TV
channel for the window picture
Press PIP again to display a smaller window
picture.
Input-source mode or TV
channel for the main picture
Main picture
PIP
Window picture
(1/16 size)
Input-source mode or TV
channel for the window picture
To remove the window picture, press PIP again.
Note
• The window picture may be affected by the condition of the
main picture.
Changing the window picture input
mode
Press TV/VIDEO (yellow labelled button) to
select the input mode.
Each time you press TV/VIDEO (yellow labelled
button), "TV", "VIDEO 1", "VIDEO 2", and "VIDEO 3"
appear in sequence.
TV/VIDEO
A window picture will appear in the same input mode
as the last time you used PIP.
Note
• If you connect your VCR without a cable box, your PIP input
source is a VCR. If you connect your VCR with a cable box,
your PIP input source is a VCR or cable box.
Listening to the sound of the window
picture
Press AUDIO.
The
display appears next to the PIP channel number
for a few seconds, indicating that the window picture
sound is being received.
AUDIO
The sound of the window
picture is received.
To restore the main picture sound, press AUDIO again.
The
display moves to the main picture channel
number.
Changing TV channels in the window
picture
Press CH +/– (yellow labelled button).
TV/VTR
+
CH
–
21
-EN
Operations
EN
Advertisement
Table of Contents
