Using The Remote Control As A Presentation Pointer - Epson VS220 Manual

1. Connect the projector to a computer using the projector's USB TypeB, Computer, or HDMI port to
display video.
2. If you connected your computer to the Computer or HDMI port, also connect a USB cable to the
projector's USB TypeB port and to a USB port on your computer (for wireless mouse support).
3. Start your presentation.
4. Use the following buttons on the remote control to control your presentation:
• To move through slides or pages, press the up or down Page buttons.
• To move the cursor on the screen, use the arrow buttons.
• To left-click, press the
• To right-click, press the Esc button.
• To drag-and-drop, hold the
at the destination.
Parent topic:
Related references
Projector Setup Settings - Extended Menu

Using the Remote Control as a Presentation Pointer

You can use the projector's remote control as a pointer to help you call out important information during
a presentation. The default pointer shape is an arrow, but you can select an alternative shape using the
Settings menu.
button once (press it twice to double-click).
button as you move the cursor with the arrow buttons, then release
Remote Control Operation
52