Projector Information Display - Info Menu - Epson PowerLite Home Cinema 750HD Manual

Projector Information Display - Info Menu

You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu. The information displayed depends on the currently
selected input source.
Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10
hours. Available settings depend on the current input source.
Information item
Lamp Hours
Source
Input Signal
Resolution
Video Signal
Refresh Rate
3D Format
Sync Info
Description
Displays the number of hours (H) the lamp has been used in each
Power Consumption mode; if the information is displayed in yellow,
obtain a genuine Epson replacement lamp soon
Displays the name of the port to which the current input source is
connected
Displays the input signal setting of the current input source
Displays the resolution of the current input source
Displays the video signal format of the current input source
Displays the refresh rate of the current input source
Displays the 3D format of the current input source
Displays information that may be needed by a service technician
93