One-Touch Telephone Dialing; Registering One-Touch Telephone Numbers - Epson X-PRF 1000 Owner's Manual

Priorit yFax 1000 M anual
One-touch
Telephone Dialing
Registering One-touch
Telephone Numbers
3-4
The PriorityFax allows you to register three one-touch telephone
numbers for dialing frequently called numbers by pushing just one
button. If you prefer using one-touch dialing for fax numbers, see
Chapter 2 First you must register the one-touch telephone
numbers.
Note
Using one-touch dialing requires use of
memory capability. Your telephone unit requires annual
replacement of two button batteries to ensure that the
telephone numbers stored in memory are not erased
during a power failure. See Memory Batteries in
Chapter 2.
To register one-touch telephone numbers, first set the
PULSE switch as described on page 3-2
below:
Lift the telephone
which is
button,
While holding down
number using
code, press
number. Also, if your telephone system requires a code such as 9
REDIAL
before a telephone number, press
the code. A maximum of 16 digits (15 if
entered for each one-touch number. (A pause counts as
and locate
handset
large button at
the
DIAL TONE RESET,
the keypad. If you are using an international access
after the code and before the rest of the
REDIAL
the telephone' s
Then follow the steps
the DIAL TONE RESET
bottom.
the
enter the telephone
to enter a pause after
REDIAL
tone is selected) may be
TONE/
one digit.)