Table of Contents
Advertisement
Speed Dial Faxing
Registering speed dial fax
numbers
STORE
MEMORY
O P E R
D
You can register up to 17 speed dial numbers for dialing
frequently called fax numbers by pressing
two number keys. Fist you must register the fax numbers.
Note
Speed dial may be used for telephone numbers as well as
fax numbers.
To register the speed dial numbers, follow the steps below:
holding down the
While
shown on page 2-9), enter a telephone number using the keypad.
If you are using
the code and before the rest of the number. Also, if your telephone
system requires a code such as 9 before a telephone number, press
REDIAL
of 16 digits for each speed dial number. (A pause counts as one
digit.)
Press
STORE/MEMORY.
E
F
Because speed dial numbers are 03 through 19, enter 03 to register
the first speed dial fax number.
Release the
is n ow stored and
and then 03 on the keypad.
Write down an identification next to 03 on the Memory Index label
on the telephone cradle.
DIAL TONE RESET
an international access code, press
to enter a pause after the code. You may enter a maximum
DIAL TONE RESET
can
be dialed by pressing
Using the PriorityFax
STORE/MEMORY
button (which is
REDIAL
button. The number you entered
STORE/MEMORY
and
after
2-11
Advertisement
Table of Contents
