Aligning Rip Fence - Craftsman 113.298720 Owner's Manual

ALIGNING RiP FENCE
The fence should slide easily along the bars and
always remain in alignment (parallel to sawblade
and miter gauge grooves).
The alignment is maintained by a spring underneath
the fence which bears against the front guide bar.
TO movethe fence, loosen the lock handle and grasp
the fence with one hand at the front.
For very close adjustments, grasp theguide bar with
both hands and move the fence with your thumbs.
\
SELF ALIGNING ADJUSTMENT
Place fence on saw but DO NOT LOCK IT.
Move the R EAR END of the fence slightly to the right
or left. , . when you release it, the fence should
"spring" back to its original position.
If i| does not, the spring pressure must be IN-
1. Looser, the screws.
2 Move Spring slightly toward front of fence.
14