Canon EOS 5D MARK II Instruction Manual page 7

t_# Printing
_,_ Set the printing effects.
® Set as necessary, if you need not set
any printing effects, go to step 5.
® The screen display may differ
depending on the printer.
® Select the option on the upper right,
then press <_>.
® Select the desired printing effect with
the dial, then press <_>.
® If the <[]> icon is displayed next to
<_1-=_>, you can also adjust the
printing effect (p.178).
item Description
The image will be printed according to the printer's standard
On colors. The image's Exif data is used to make automatic
corrections.
Off No automatic correction will be performed.
The image will be printed with higher saturation to produce
_Vivid more vivid blues and greens.
_NR The image noise is reduced before printing.
B/W B/W Prints in black-and-white with true blacks.
B/W Cool tone Prints in black-and-white with cool, bluish blacks.
BiW Warm tone Prints in black-and-white with warm, yellowish blacks.
11311Naturam Prints the image in the actual colors and contrast. No
automatic color adjustments will be applied.
The printing characteristics are the same as the "Natural"
Natural M setting. However, this setting enables finer printing
adjustments than with "Natural."
The printing will differ depending on the printer. For details,
Default see the printer's instruction manual.
When you change the printing effects, it is reflected in the image displayed on
the upper left. Note that the printed image might look slightly different from the
displayed image which is only an approximation. This also applies to
[Brightness] and [Adjust levels] on page 178.
176