Setting Up The Monitor - Gateway VX760 User Manual

Using Your VX760/VX765 Monitor

Setting up the monitor

2
Read all instructions before using the monitor and save them for later use.
Follow all warnings and instructions marked on the product.
To set up the monitor:
Attach the base
■
Connect the video and power cables
■
To attach the base:
Carefully set the monitor on its side.
1
Hold the base with the tab facing the back of the monitor and align the
2
hooks on the base with the corresponding slots on the bottom of the
monitor.
Slide the base toward the front of the monitor so all hooks are securely in
3
place. A retaining latch built into the base clicks into place when the base
is correctly attached.
Carefully set the monitor upright and place it on a sturdy, level surface.
4
To connect the video and power cables:
Position the monitor and your computer so you can easily get at the back
1
panel of each. Make sure that all power cables can reach a correctly
grounded electrical outlet.
Connect the video cable to the matching (blue) video port on the back of
2
your computer.
Tighten the screws on the video cable connector to keep it from coming
3
loose. Tightening the screws also prevents radio and TV interference.
www.gateway.com