Epson S01-00 User Manual page 14

3. Open the connector cover on the side of the
camera. Insert the other end of the cable to the
interface connector. Make sure the shape of the
connector fits the interface connector.
Caution:
c
Be sure to position the cable correctly before
pushing it into the connector. Otherwise, the
cable's pins may be damaged.
4. Turn the camera's dial switch to
your computer.
c
connector cover
and turn on
Note:
Make sure AppleTalk is inactive for the port that you
use to connect your camera. Otherwise, the computer
may not recognize your camera.
Caution:
Keep your camera and computer away from
potential sources of electromagnetic interference,
such as loudspeakers or the base units of cordless
telephones.
Installing the Software
1
1-5