Table of Contents
Advertisement
3.
Open the connector cover on the side of the
camera. Insert the other end of the serial cable to
the interface connector. Make sure the shape of
the cable connector fits the interface connector.
Caution:
c
Be sure to position the cable correctly before
pushing it into the connector. Otherwise, the
cable's pins may be damaged.
4.
Turn the camera's dial switch to
your computer.
1-4
Installing the Software
Connecting to a Macintosh
connector cover
and turn on
Caution:
c
Keep your camera and computer away from
potential sources of electromagnetic interference,
such as loudspeakers or base units of cordless
telephones.
You can connect the camera to a Macintosh with a
Macintosh serial cable. Follow the steps below.
Note:
To connect to a Macintosh with a USB cable, see "Using
the USB cable" on page 1-2.
1.
Make sure the camera and your computer are
turned off.
2.
Plug the serial cable connector into the modem or
the printer port on your computer.
Macintosh serial cable
Advertisement
Table of Contents
