Installing Your Photopc 650 Software; Installing On A Windows Pc; Installing On A Macintosh - Epson PhotoPC 650 User Manual

Installing Your PhotoPC 650 Software

Your PhotoPC 650 comes with everything you need to
transfer your pictures from the camera to your computer,
and organize, enhance, and print your images. The
CD-ROM has these applications for your PC or Macintosh:
PictureWorks HotShots
EPSON PhotoPC 650 TWAIN driver (Windows) or
Plug-In driver (Macintosh)
It also contains the driver software for the JumpShot USB
cable and USB CompactFlash card, which you need to install
only if you're using a compatible USB system. If you're using
a Macintosh, you'll install the USB drivers along with your
other camera software. Installation of the Windows 98 USB
drivers is covered in Chapter 4.

Installing on a Windows PC

Close all open applications, then follow these steps:
1
Insert the EPSON CD-ROM in your drive.
2
Double-click My Computer . Then double-click your
PhotoPC 650 CD-ROM icon.
3
Double-click the Setup.exe icon. The installer opens.
1-8 Getting Started
4
Follow the instructions on the screen to install HotShots
and EPSON PhotoPC 650 TWAIN. Be sure to select
Full Install on the Setup Options screen.

Installing on a Macintosh

Close all open applications, then follow these steps:
1
Insert the EPSON CD-ROM in your drive.
2
Double-click the PhotoPC 650 CD-ROM icon on your
desktop to open the CD-ROM window, if necessary.
3
Double-click the HotShots Installer icon to install
HotShots and the EPSON PhotoPC 650 Plug-In driver.
Click Continue and follow the on-screen instructions.
4
If you're using an iMac or a Power Macintosh G3, you
also need to install the drivers for the JumpShot USB
cable and USB CompactFlash card.
Double-click the Lexar Media JumpShot folder to
open it, then double-click the Lexar Media
JumpShot Installer icon. Follow the on-screen
instructions to view the license agreement and Read Me
file, and install the drivers. At the end of installation,
click Restart to restart your system.