Logon - Hitachi CP-X467 Network Manual

4.1 Configuring and controlling the projector via a web browser (Continued)

4.1.1 Logon

Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter "http://192.168.1.10/" into the address
bar of the web browser and press "Enter"
key or click "
4.1.1a will be displayed.
2) Enter your ID and password and click
[Logon].
Below are the factory default settings for Administrator ID, User ID and passwords.
Item
Administrator
User
If the logon is successful, either the Fig. 4.1.1 b or Fig. 4.1.1 c screen will be
displayed.
Main menu
Fig. 4.1.1 b "Logon with Administrator ID"
3) Click the desired operation or configuration item on the main menu located on
the left-hand side of the screen.
" button. The screen in Fig.
ID
Administrator
User
4. Management with Web browser software
Password
<blank>
<blank>
Main menu
Fig. 4.1.1 c "Logon with User ID"
Fig. 4.1.1 a "Logon menu"
67