ASSEMBLY
SIMPLE STEPS TO REMEMBER
WHEN CONVERTING
YOUR LAWN MOWER
FOR MULCHING
-
o
Rear mulcher plug installed.
,
Side discharge guard closed and locked securely.
FOR REAR BAGGING -
•
Rear mulcher plug removed.
Grass catcher installed.
,
Side discharge guard closed and locked securely.
FOR SIDE DISCHARGING
-
•
Rear mulcher plug installed.
o
Side discharge guard unlocked and open.
net run your la_wn mower
A,_
w'_ulcher
plug in place or
! _
ap_
grass
catcher
in place.
_
Never
attempt
to operate
the lawn
mower with the rear door removed or
TO ASSEMBLE
& A=I=I'ACH GRASS
CATCHER
(See
Figs.
3 & 4)
•
Put grass catcher frame into grass bag with rigidpart of
bag on the bottom,
Make sure the frame handle is
outside of the bag top.
•
Slip vinyl bindings over frame.
NOTE:
If vinyl bindings are too stiff, hold them in warm
water for a few minutes.
If bag gets wet, let it dry before
using.
,
Lift the rear door on the lawn mower and place the
grass catcher frame side hooks onto the handle bracket
hooks.
•
The grass catcher
is secured to the lawn mower
housing when the rear door is lowered onto the grass
catcher frame.
A
C_o
not run your lawn mower
without cHppiqg deflector or approved
I
grass catcherjn
place. Never attempt
--
to operate the lawn mower with the rear
|
door removed or propped open.
CATCHER
FRAME
HANDLE
FiG, 3
CATCHER FRAME
SIDE HOOK
REAR DOOR
'GRASS
CATCHER
HANDLE
HANDLE
BRACKET
HOOK
FIG. 4
7