Epson A882401 User Manual page 36

The display panel on the computer and the display
panel on the camera are updated whenever the image
quality setting, flash mode, or picture count changes.
Selecting the image quality setting
Click anywhere inside the Control menu's Mode box
to select an image quality setting.
Image Quality Setting
Standard
Fine
Super Fine
HyPict
Monochrome Fine
Monochrome Super Fine
Monochrome HyPict
You can switch freely between these settings and mix
pictures of varying image quality in the camera. Keep
in mind that the memory card's picture capacity varies
accordingly. See the user's guide of your camera for
more information on the image quality settings.
Resolution in Pixels
640 480
1600 1200
1600 1200
1984 1488
1600 1200
1600 1200
1984 1488
Selecting the flash mode
Use the arrow in the Control menu's Flash box to select
one of the following flash mode settings.
Off, Automatic, Red-eye Reduction, Forced,
Slow sync
Note:
The red-eye reduction setting is available only on the
PhotoPC 850Z.
When taking photos in the Full Auto camera mode,
slow synchro is not available. See the user's guide of
your camera for details.
Setting the self timer
Select the Self Timer check box in the Controls menu
to activate the self timer. See the user's guide of your
camera for more information.
Selecting macro mode
Select the Macro check box in the Controls menu to
turn on the macro feature. See the user's guide of your
camera for details on the macro feature.
2-17
Using EPSON Photo!3
2