Epson A882401 User Manual page 14

Connecting to a Macintosh
You can connect the camera to a Macintosh with a
Macintosh serial cable. Follow the steps below.
Note:
To connect to a Macintosh with a USB cable, see "Using
the USB cable" on page 1-2.
1. Make sure the camera and your computer are
turned off.
2. Plug the serial cable connector into the modem or
the printer port on your computer.
Macintosh serial cable
3. Open the connector cover on the side of the
camera. Insert the other end of the cable to the
interface connector. Make sure the shape of the
connector fits the interface connector.
PhotoPC 800
PhotoPC 850Z
connector cover
Installing the Software
1
connector cover
1-5