Table of Contents
Advertisement
note
See your Apple documentation
for instructions on setting up
your Macintosh.
note
Use either ESSID ad hoc
(computer-to-computer) mode
or Access Point (infrastructure)
mode when you set up your
projector. Channel ad hoc
mode is not supported for
Macintosh.
See the User's Guide for
information about the ESSID.
6
5. For optimal performance, set your screen resolution to
1024 × 768 or lower with a color depth of thousands of colors.
6. Click the AirPort icon on the Application bar at the top of the
Macintosh desktop. You see a pull-down menu like this:
7. Check to make sure AirPort is turned on.
8. Select your projector's ESSID from the pull-down menu.
If you don't see the projector's ESSID, see page 8 for
troubleshooting tips.
Projecting Wirelessly
Before you begin, make sure you've inserted the EPSON wireless
(802.11b) card in the projector and followed the steps beginning on
page 5 to set up your Macintosh.
1. Double-click the
EMP NS Connection
folder.
icon in your Applications
Advertisement
Table of Contents
