Projecting Wirelessly - Epson PowerLite 737c User Manual

note
If you don't see your network
adapter's IP address, allow a
minute for it to appear. If
your access point or AirPort
base station uses DHCP
(
Distribute IP addresses
setting is enabled for
AirPort), sometimes it takes
a minute for the server to
pick up the IP address.
Once you've selected the IP
address for your network
adapter, you won't see the
Switch network dialog
box when you start
NS Connection. If you want
to change to a different
network adapter, click
on the EMP NS
Extension
Connection dialog box, then
click on the
Switch LAN
extension dialog box.
Presenting Through a Wireless Network
74
then press the
next character position. When done typing the password,
press .
Enter
3. When you're done making settings, highlight the
the top of the screen and press

Projecting Wirelessly

Once you've started EasyMP and set up your projector and computer
in either Ad Hoc mode or Access Point mode, follow these steps to
start NS Connection and project wirelessly.
1. Make sure you've installed your 802.11G/B wireless card in your
projector (see page 50).
2. Windows: Select
EMP NS Connection
Macintosh OS X: Double-click the
your Applications folder.
3. The first time you start NS Connection, you may see a dialog box
asking you to select your network. Select the IP address for your
computer's network card and click
pointer button to the right to move to the
.
Enter
from the Start menu.
EMP NS Connection
.
OK
button at
OK
icon in