Accessories; Assembly - Craftsman 917.383370 Owner's Manual

Table of Contents

Advertisement

LAWN MOWER ACCESSOIR ES
These accessories were available, when this lawn mower was produced
They are also available at most Sears retail Outlets,
catalog and service centers
Most Sears stores can also order repair parts for you, when you provide the model number of
your lawn mower. Some of these accessories may not appty to your lawn mower
ENGINE
;PARK PLUG
MUFFLER
AIR FILTER
GAS CAN
ENGINE OIL
,
,=,
STABILIZER
LAWN MOWER MAINTENANCE
BELT
BLADE
BLADE
ADAPTER
WHEELS
LAWN MOWER
COVER
ASSEMBLY
=,l ....................
Read these instructions
and the Owner's Manual in its
entirety before you attempt to assemble or operate your
new lawn mower.
Your new lawn mower has been as-
sembled at the factory with the exception of those parts left
unassembled for shipping purposes_ All parts such as nuts,
washers, bolts, etc. necessary to complete the assembly
have been placed in the parts bag, To ensure safe and
proper operation of your lawn mower, all parts and hard-
ware you assemble must be tightened securely.
Use the
correct tools as necessary to ensure propei" tightness_
TO REMOVE LAWN MOWER
FROM
CARTON
o
Remove loose parts included with mower.
.
Cut down two end corners of carton and lay end panel
down flat.
.
Remove
all packing
materials except padding be-
tween upper and lower handle and padding holding
operator presence control bar to upper handle,.
Roll lawn mower out of carton and check carton
thoroughly for additional loose parts°
HOW TO SET UP YOUR LAWN
MOWER
TO UNFOLD
HANDLE
(See Figs. 1 & 2)
Raise lower handle section to operating po_ition and
align hole in handle with one of three height positioning
holes
°
Insert handle bolt through handle and bracket and
secure with knob
°
Repeat for opposite side of handle
°
Raise upper handle section to operating position, re-
move protective padding and tighten handle knobs
securely
OPERATOR
PRESENCE
CONTROLBAR
UPPER HANDLE
MOWING
POSITION
LOWER HANDLE
FIG. 1
HANDLE
ADJUSTMENT
BRACKET
KNOB
BOLT
FIGo 2
Remove any packing material from around control bar
Your handles may be adjusted for your mowing com-
fort, Refer to Service and Adjustments section of this
manual.

Advertisement

Table of Contents
loading

Table of Contents