Adjusting The Brightness And Contrast - Epson Professional Series II User Manual

Note
If the LCD still flashes H/V SYNC OFF after you press
INPUT SEL,

Adjusting the Brightness and Contrast

the
To make
Brightness and Contrast buttons (shown below) to adjust and
save the monitor's brightness and contrast settings. The
Brightness button controls the screen's background (raster)
intensity and the Contrast button controls the intensity of the
displayed image.
Brightness button
To adjust the brightness and contrast, follow these steps:
1. To adjust the brightness, press the - or + side of the
Brightness button. The LCD displays a scale composed of
vertical bars, such as Brght :
Press and hold down the + side of the Brightness button to
increase
you reach the minimum brightness setting, a small square
replaces
an arrow appears on the right side of the scale.
see page 39 in "Troubleshooting."
on the
image screen clear and easy-to-read, use the
the
brightness or the - side to decrease it. When
the
scale of vertical bars. At the maximum
Contrast button
Professional Series II Monitor
setting,
2 1