Registering Several Projectors To A Monitoring Group All At Once - Epson EMP MONITOR OPERATION V4.30 User Manual

Registering and deleting projectors for monitoring
Port Number If using a serial TCP/IP conversion adapter to
connect the projector, enter the port number.
Monitor If a Monitor Password has been set for the
Password projector, be sure to enter the Monitor Password
that has been set. If the correct password is not
entered at this time, it will not be possible to
monitor and control the projector even though it
is registered. If using a serial TCP/IP conversion
adapter to connect the projector, the Monitor
Password security function cannot be used.
Description You can enter some kind of memo about the
projector. The details you enter here will be
displayed at the projector properties.
Up to a maximum of 60 bytes can be entered.
Monitor Select this when you want monitoring to start.
D
After entering the details, click "Register" to start the
registration. When the message is displayed, click "OK".
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
Registering several projectors to a monitoring group
all at once
Projectors that have been registered can then be registered together into
different groups so that they can be monitored and controlled together.
Furthermore, if you select one of the registered groups as the Parent
group, monitoring and control operations can be carried out for all
projectors in that Parent group.
A Parent group can be set for other parent groups, so that a hierarchical
group arrangement can be created.
First, create the registration groups, and then register projectors into the
groups that have been created.
18