Advertisement
ASSEMBLY
PARTS
IDENTIFICATION
COVER ASSEMBLY
UPPER CHUTE
NEW BLADE BOLT
\
DUMP
BAG
INDICATOR
ADAPTER
NEW CROSS
BLADE
E LATCH
CATCHER
CONTAINERS
LOWER CHUTE
LOWER CHUTE
ATTACHING
STRAPS
NOTE: When right hand (RH)
and left hand (LH) are mentioned in this manual, it means when you are seated on the
tractor, in the operator's position
THESE ARE THE TOOLS YOU WILL NEED TO
ASSEMBLE YOUR GRASS CATCHER:
(1) 3/8" Wrench
(1) 112"Wrench
(2) 9/16" Wrenches
(1) 1/2" Socket
(1) 9/16" Deep well Socket
(1) Drive Ratchet
(1) 3" or longer Extension
(1) Short Handle
Phillips Screwdriver
CAUTION:
BEFORE ASSEMBUNG
GRASS CATCHERTOTRACTOR:
i
epress clutch/brake
pedal fully and set parking brake.
Place gearshift/motion
control lever in neutral (N) posltion.
Place attachment clutch In "DISENGAGED" position.
"rum ignition key "OFF" and remove key.
Make sure the blade and all moving parts have completely stopped.
•
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plug.
6
Advertisement
