Table of Contents
Advertisement
16.
S lide plastichandle bracket onto right and left legs.
17. Slide metal handle into (2) holes on plastic handle
bracket.
18. Align holes in handle with hole in leg and plastichan-
dle bracket.
f
m
h
0
Metal Handle
Plastic
Handle Bracket
19. Install (2) #10 x 314 screws into (2) holes on legs with
(2) matching holes on handle for each side.
NOTE: To adjust height, slide metal handle up till one hole
is visible on each side. The (2) holes on legs should then
line up with (2) holes on metal handle.
WARNING: To reduce the risk of personal Injury or dam-
age to unit from handle failure, make sure the SCIONSare
fully screwed in and snug, but not so tight they crack the
p astic.
5
Advertisement
Table of Contents
