Table of Contents
Advertisement
10. For the "Capturing Side/Color Mode/Resolution," specify the scanning settings.
Capturing Side
Color Mode
Resolution
11. When the configuration is finished, click the [OK] button to close the [Scanner set-
tings] window.
12. Click the [Scan] button on the toolbar.
⇒
When the scanning is complete, the scanned images of the business cards are displayed
on the [Inbox] tab of the main screen.
You may see the scanner driver dialog box (TWAIN dialog box) when scanning
ATTENTION
business cards.
If this is the case, specify the following and proceed with operation.
•
Recommended resolution
Color mode:
Black and White mode:
•
Scanning size
Flatbed:
If the business card is printed on one side, select "Simplex." If it
is printed on both sides, select "Duplex." For "Duplex," after the
front side is scanned, the back side will be scanned.
When the message below appears, turn over the business card,
and click the [OK] button.
If you click the [Cancel] button, scanning mode is switched to
Simplex.
Specify the color mode, "B&W" (Black & White) or "Color."
Specify the resolution to be used.
For TWAIN scanners: 150, 200, 300, and 400dpi.
To scan in color: "Best" or 300dpi is recommended.
To scan in B&W: "Best" or 400dpi is recommended.
300 dpi
400 dpi
A4
3.1 How to Scan Business Cards
CardMinder User's Guide
3
20
Advertisement
Table of Contents
