Mounting Orientations; Figure 4.2 Hdd Orientations - Fujitsu MAY2036RC Product/Maintenance Manual

Installation Requirements
4.1.2

Mounting orientations

The permissible orientations of the HDDs are shown in Figure 4.2, and the tolerance of the angle is
±5° from the horizontal plane.
As show in Figure 4.2, the drive can be installed flat on any of its six sides. Inclination from a
vertical or horizontal plane should not exceed 5°.
(a) Horizontal –1
(e) Upright mounting –1
4-2
(c) Vertical –1
Direction of gravity
Figure 4.2 HDD orientations
(b) Horizontal –2
(d) Vertical –2
(f) Upright mounting –2
C141-E230