Operation; Inserting An Mo Disk - Fujitsu DynaMO 640FE User Manual

3. Operation

3.1 Inserting an MO Disk

Gently insert the MO disk with the label side up, as shown below, until the disk
clicks into the place.
The busy indicator will come on while the MO disk is loaded. Wait for the busy
indicator to go off before using disk. The 1.3GB MO disk takes a little longer
to become ready after disk insertion.
Important:
Never force the disk into the drive or insert MO disk
upside down as this may damage the drive.
Since a floppy disk is about the same size as your MO
disk, be careful to never insert a floppy disk into the
DynaMO.
Do not insert foreign objects into the drive.
Notice:
In case the MO disk is not inserted properly, push the
eject button and then try to reinsert the disk.
1.15