Installing El I/O Shield And Lcd Poster - Asus Rampage II Extreme - Republic of Gamers Motherboard User Manual

2.8.3

Installing EL I/O shield and LCD Poster

1. Install the EL I/O shield to the
chassis by snaping it in place
from inside.
Locate the EL_CON connector
3.
and connect the shield cable
to the connector in a correct
orientation.
5. Locate and connect the LCD
Poster cable to the LCD_CON
connector.
2-48
2. Orient the motherboard and install
it to the chassis. Make sure that
the motherboard external ports fit
the shield openings.
4. Thread the LCD Poster cable
through the back I/O shield
opening until the stopper fits the
opening.
6. Place the LCD Poster on the
chassis or to wherever you like.
Chapter 2: Hardware information