Inserting The Card - Epson Stylus Photo RX580 Basic Manual

Inserting the Card

1. Make sure the RX580 is turned on.
2. Open the memory card slot cover.
Caution:
If your card requires an adapter, make sure you insert it into the adapter before you
insert it in the slot. Otherwise, the card may get stuck in the slot. Do not insert
more than one card at a time, and do not force the card into the slot.
3. Make sure the memory card access light is off and that no cards are in any of
the slots, then insert your card into the correct slot. See page 21 for details.
The memory card access light flashes and then stays on.
4. Close the memory card slot cover. See page 25 for printing instructions.
22
Printing From a Memory Card
Memory card
access light