Epson Stylus 411638300 Quick Start Manual page 6

5
When prompted, connect a USB cable. Use any open USB port on your
computer.
Note:
If installation doesn't continue after a moment, make sure you
securely connected and turned on the NX510 Series.
6
Follow the on-screen instructions to install the rest of the software and
register your NX510 Series.
7
When you're done, remove the CD.
You're ready to print, copy, and scan! See your Quick Guide or on-screen
Epson Information Center.
Macintosh
®
1
Make sure the NX510 Series is NOT CONNECTED to your computer.
2
Insert the NX510 Series software CD.
3
Double-click the
4
Click Install and follow the on-screen instructions.
5
When you see this screen, select Install driver for direct USB
connection and then click Next.
6
When prompted, connect a USB cable. Use any open USB port on your
computer. Make sure the NX510 Series is securely connected and turned
on.
If you're using Mac OS X 10.5.x, skip to step 9.
If you're using Mac OS X 10.3.9 or 10.4.11, continue with the next step.
Epson icon.