Load Paper - Epson Stylus 411638300 Quick Start Manual

5
Press each cartridge down until it clicks.
6
Close the ink cartridge cover. Press it down until it clicks.
7
Lower the scanner.
8
Press the OK button to charge the ink. Charging takes about 3 minutes.
N ote:
Your NX510 Series ships with full cartridges and part of the ink from the
first cartridges is used for priming the NX510 Series.
Caution:
Don't turn off the NX510 Series while the ink system is charging or
you'll waste ink.
5

Load paper

1
Open the paper support and pull up the extensions.
2
Open the output tray, pull out the extensions, and raise the stopper.
Note:
If you are using legal-size paper, do not raise the stopper.