Troubleshooting - Craftsman 917.276050 Owner's Manual

22.0 hp, 50" mower electric start 6 speed transaxle
Table of Contents

Advertisement

TROUBLESHOOTING
CHART:
See appropriate
section in manual unless directed to Sears service center
PROBLEM
Will not start
2.
3,
4.
5.
6.
7
Hard to start
Engine will not
turn over
Engine clicks but
will not start
CAUSE
CORRECTION
1. Out of fuel.
Engine not "CHOKED"
properly.
Engine flooded.
3.
Bad spark plug.
4.
Dirty air filter.
5.
Dirty fuel filter.
6.
Water in fuel.
7.
8. Loose or damaged wiring.
8.
9. Carburetor
out of adjustment.
9.
10. Engine valves out of
adjustment.
1. Dirty air filter.
1.
2. Bad spark plug.
2.
3. Weak or dead battery.
3.
4. Dirty fuel filter.
4.
5. Stale or dirty fuel.
5.
6. Loose or damaged wiring.
6.
7. Carburetor
out of adjustment.
7.
8. Engine valves out of
8.
adjustment.
1. Clutch/brake
pedal not
1.
depressed.
2. Attachment
clutch is
2.
engaged.
3. Weak or dead battery.
3.
4. Blown fuse.
4.
5. Corroded battery terminals.
5.
6. Loose or damaged wiring.
6.
7. Faulty ignition switch.
7.
8. Faulty solenoid or starter.
8.
9. Faulty operator presence
9.
switch(es).
1. Weak or dead battery.
1.
2. Corroded battery terminals.
2.
3. Loose or damaged wiring.
3.
4.
Faulty solenoid or starter.
4.
1. Fill fuel tank.
2. See "TO START ENGINE"
in Operation section.
Wait several minutes
before attempting to start.
Replace spark plug.
Clean/replace
air filter.
Replace fuel filter.
Empty fuel tank and
carburetor,
refill tank with
fresh gasoline and replace
fuel filter.
Check all wiring.
See "To Adjust Carburetor"
in Service and Adjustments
section.
10. Contact a Sears or other
qualified service center.
Clean/replace
air filter.
Replace spark plug.
Recharge or replace
battery.
Replace fuel filter.
Empty fuel tank and refill tank
with fresh, clean gasoline.
Check all wiring.
See "To Adjust Carburetor"
in Service and Adjustments
section.
Contact a Sears or other
qualified service center.
Depress clutch/brake
pedal.
Disengage attachment
clutch.
Recharge or replace
battery.
Replace fuse.
Clean battery terminals.
Check all wiring.
Check/replace
ignition
switch.
Check/replace
solenoid or
starter.
Contact a Sears or other
qualified service center.
Recharge or replace battery.
Clean battery terminals.
Check all wiring.
Check/replace
solenoid or
starter.
30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents