Honda Pilot Owner's Manual page 258

Playing the FM/AM Radio (Models with navigation system)
Preset Each preset button or
preset icon can store one frequency
on AM and two frequencies on FM.
To store a preset memory location:
Select the desired band, AM or
1.
FM. FM1 and FM2 let you store
two sets of FM frequencies with
the preset buttons (on-screen
icons).
Use the tune, seek, or scan
2.
function to tune the radio to a
desired station.
Press the preset button, and hold
3.
it until you hear a beep. You can
also store frequencies with the
interface dial. Select the preset
icon you want to store the
frequency on, then press ENTER
on the interface selector, and hold
it for more than 2 seconds.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
254
A.SEL ICON
AUTO SELECT If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Push the interface selector down to
scroll down the screen, highlight
A.SEL, then press ENTER on the
interface selector. You will see
A.SEL on the screen, and the system
goes into scan mode for several
seconds.
2009 Pilot
On vehicles without rear entertainment
system
You can also press the A.SEL button.
You will see A.SEL on the screen,
and the system goes into scan mode
for several seconds. The system
stores the frequencies of six AM and
twelve FM stations in the preset
buttons.
You will see ''0'' displayed if auto
select cannot find a strong station for
every preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons (icons) as previously
described.
To turn off auto select, press
ENTER on the interface selector or
press the A.SEL button again. This
restores the presets you originally
set.