Muratec MFX-3070 User Manual page 27

7. To use Actkey in Local PC mode (i.e. push scanning), it must be set as the
program to handle scanner events:
Note
The following example uses Windows XP. The steps may vary if you are
using any other operating system, but the principle is the same.
a. Select Start > Control Panel.
b. Double-click Scanners and Cameras.
c. Right-click the MFP icon and click Properties.
d. Select the Events tab.
e. Choose an event from the Select an event drop-down menu.
f. In the Actions field, click Start this program and choose ActKey from the
dropdown menu.
g. Click Apply.
h. Repeat steps e to g for each event, e.g. Scan to Application, E-mail, Folder and
PC-Fax.
i. Click OK to confirm.
27 • Getting Started