Muratec MFX-3070 User Manual page 158
Hide thumbs
Also See for MFX-3070:
- Quick manual (4 pages) ,
- Quick manual (2 pages) ,
- Quick product manual (8 pages)
Table of Contents
Advertisement
6. Remove any jammed sheets from the paper path.
7. Holding the complete assembly by its top centre, lower it into place in the MFP,
locating the pegs at each end into their slots in the sides of the MFP cavity.
8. Lower the top cover but do not press down to latch it closed yet. This will protect
the drums from excessive exposure to room lighting while you check the
remaining areas for jammed sheets.
9. Open the rear cover and check for a sheet of paper in the rear path area.
158 • Troubleshooting
Advertisement
Table of Contents
